[time-nuts] Racal-Dana 1992 switches
Matt Ettus
boyscout at gmail.com
Mon Mar 24 18:46:35 UTC 2008
On Mon, Mar 10, 2008 at 8:47 AM, Dan Rae <danrae at verizon.net> wrote:
> David McGaw wrote:
>
> >Does anyone know of a source of push-button switches for the
> >Racal-Dana 1992? I have one that over half are bad. No luck from
> >Racal-Dana or their service house.
> >
> >
> The original makers of that switch (Omron?) stopped making them years
> ago. I wonder why?
>
> The last time I did this I found a switch at Jameco that was a near
> exact replacement. The only difference was that the button was a little
> too loose a fit and needed a dab of epoxy inside to hold it firmly in
> place. These have been working in mine now for at least five years.
> The type I used was KIE22 (29 cents each in 100s), however the ones I
> got then with a cross section shape blue plunger do not look exactly
> the same as the ones pictured in the current on line catalog. Some
> further research is indicated obviously...
>
> Once they start to go they will all need to be replaced, I'm afraid.
>
I bought the ones in the catalog, but they don't fit. The footprint
is bigger, for one thing.
Matt
More information about the Time-nuts_lists.febo.com
mailing list