[time-nuts] NI PCI GPIB Cards
Patrick
optomatic at rogers.com
Sun Mar 30 14:31:14 UTC 2008
Hi Nigel
How many do you have?
Do you have any photos or specific revision numbers, model numbers etc?
Thanks-Patrick
GandalfG8 at aol.com wrote:
> I hope this post is considered appropriate, if not please let me know and
> accept my advance apologies.
>
> I have several NI PCI GPIB cards that are surplus to my requirements.
> I was intending to put them on Ebay but thought I would offer them here
> first.
>
> These are the older style and were removed from working test setups.
> All are in excellent condition and have been tested using NI 488-2 software
> to control an HP3336A signal generator.
> I will send them anywhere at a fixed price of £80, eighty pounds, each with
> the buyer also to pay for insured postage.
> Paypal payment would probably be easiest although I'm happy to discuss
> alternatives but can only accept payment in British pounds.
> Please contact me off list if interested.
>
> Just in case anyone's wondering, all these worked first time with no
> problems and are not the cards I referred to recently that had the onboard
> oscillator partially unsoldered:-)
> However, those are also working fine too and I'm planning to use them myself
> but might be tempted to part with at least a couple if there's sufficient
> demand.
> Because of the size of the oscillator package and the very fine soldering
> used this does seem to be a general potential weakness on these boards and I
> would recommend anyway that the oscillator is always resoldered.
> I would be happy to do this and retest if requested.
>
> regards
>
> Nigel
> GM8PZR
>
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
More information about the Time-nuts_lists.febo.com
mailing list