[time-nuts] Datum/Symmetricom BC637PCI TimeandFrequencyProcessor
Rob Kimberley
rk at timing-consultants.com
Wed May 7 06:23:26 UTC 2008
Hi Greg,
Good to see you are still around! Regards to Ron H if he's still there.
I took another look for the CDs, but no luck. Can you liaise directly with
Nigel to see if you can help him out.
Cheers
Rob Kimberley
-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Greg Dowd
Sent: 06 May 2008 19:33
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Datum/Symmetricom BC637PCI
TimeandFrequencyProcessor
Let me know if you don't find them. I'm sure I have them as well. What OS,
Win32?
Greg Dowd
gdowd at symmetricom dot com (antispam format) Symmetricom, Inc.
www.symmetricom.com
"Everything should be made as simple as possible, but no simpler" Albert
Einstein
-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Rob Kimberley
Sent: Tuesday, May 06, 2008 8:30 AM
To: 'Discussion of precise time and frequency measurement'
Subject: Re: [time-nuts] Datum/Symmetricom BC637PCI Time
andFrequencyProcessor
Nigel,
I've just had a look in the boxes with assorted software in, and not found
them yet - sorry. I know I've got them somewhere!
Will take another look later today or Wednesday.
Rob
-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of GandalfG8 at aol.com
Sent: 06 May 2008 09:27
To: time-nuts at febo.com
Subject: Re: [time-nuts] Datum/Symmetricom BC637PCI Time and
FrequencyProcessor
In a message dated 06/05/2008 08:17:03 GMT Daylight Time,
rk at timing-consultants.com writes:
I have some CDs in the store room, which Datum produced which have all
their driver software on. I know they are in there somewhere, but since
moving the last time (domestic split!), I haven't had a chance to sort
through a lot of this stuff.
Will try to take a look over the next couple of days, and if they are still
there, then I'll send it over.
----------------------
Hi Rob
That's very much appreciated, thank you.
I'll keep my fingers crossed.
regards
Nigel
GM8PZR
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list