[time-nuts] HP Z3801A Communications

[Hal Murray]

> Visit this page: http://www.ad6a.com/Z3801A.html

> This tells you how to make a (simple) conversion into RS-232. I've done it
> myself and it works well. Highly recommended.

You don't need the header and jumpers.  There are 3 sets of empty pads for 0R 
jumpers setup to use the RS-232 signals.  You can reuse some of the ones you 
have to remove.


-- 
These are my opinions, not necessarily my employer's.  I hate spam.