[time-nuts] Brooke's Valpey picture

[Brooke Clarke]

Hi Randy:

Sorry, I was trying to give you a link to the Valpey VF150 data sheet, but 
their web site does not allow that.

Have Fun,

Brooke Clarke
http://www.prc68.com/P/Prod.html  Products I make and sell
http://www.prc68.com/Alpha.shtml  All my web pages listed based on html name
http://www.PRC68.com
http://www.precisionclock.com
http://www.prc68.com/I/WebCam2.shtml 24/7 Sky-Weather-Astronomy Web Cam

WB6BNQ wrote:
> Gee Brooke,
> 
> If you made the picture any bigger it would not have fit on my screen.
> 
> 73....Bill....WB6BNQ
> 
> 
> Brooke Clarke wrote:
> 
>> Hi Randy:
>>
>> Those appear to be the very common 14 pin dip IC oscillators.
>> pin 7 = ground
>> pin 14 = Vdd
>> pin 8 = Out
>> pin 1 may be no connection or may be inhibit. Check with DMM in Ohm and diode
>> function.
>>
>> It sure looks like:
>> http://www.valpeyfisher.com/images/productshots/xo/vf150.jpg
>>
>> Have Fun,
>>
>> Brooke Clarke
>> http://www.prc68.com/P/Prod.html  Products I make and sell
>> http://www.prc68.com/Alpha.shtml  All my web pages listed based on html name
>> http://www.PRC68.com
>> http://www.precisionclock.com
>> http://www.prc68.com/I/WebCam2.shtml 24/7 Sky-Weather-Astronomy Web Cam
>>
>> Randy Leifer wrote:
>>> Novice here.
>>> I have a small electronics lab at home.
>>>
>>> PART 1:
>>> I have these Valpey Fisher VF154 1 MHz oscillators.
>>> I could not find any details at the VF website on this
>>> particular model #. (OC, VC, ???)
>>> Picture/link below....
>>>
>>> PART 2:
>>> Does anyone have a link to a simple circuit, where I
>>> could use these to get a stand-alone signal @ around 1
>>> or 2 volts?
>>> This is just an educational value/exercise for me, I
>>> don't really have an intended use (yet) for these.
>>> I have some high-speed opamps and buffers....?
>>>
>>> Thanks,
>>> =Randy Leifer=
>>>
>>>
>>> http://i5.photobucket.com/albums/y177/Midiot/DSCN3333.jpg
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> time-nuts mailing list -- time-nuts at febo.com
>>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>> and follow the instructions there.
>>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>