[time-nuts] Need a simple ID for some gear
Stan W1LE
stanw1le at verizon.net
Fri Oct 3 13:08:33 UTC 2008
Sounds like a isolator, a passive ferrite device.
Stan, W1LE Cape Cod
d.seiter at comcast.net wrote:
> I don't know a whole bunch about microwave gear, so I need a little help. I came across a small box in a pile this evening and I don't have a clue what it is.
>
> It's a T construct, with SMAs at both ends of the horizontal. The vertical end looks like it's terminated to gnd. Internal construction in a plate which connects all three terminals. Above and below the plate is a ceramic triangle with a circular black insert. Each plate of the outer case has a circular magnet the same size as the black insert on the ceramic plates, on the external side, and there is a U shaped steel clamp which covers the entire assembly.
>
> This is probably a really easy question for some of you out there....what is it?
>
> I also came across some K&L filters from my time at Cylink, but the website gave me no joy. When the sample says S/N 1, I don't expect much... I suppose I could just feed a signal through them and see where the outputs occur.... both series have 5787.5 embedded n the part number, so I'm thinking that's the center or cutoff frequency.
>
> -Dave
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
More information about the Time-nuts_lists.febo.com
mailing list