[time-nuts] Sulzer Labs D-5 oscillator
Rob Kimberley
rk at timing-consultants.com
Fri Oct 10 18:22:53 UTC 2008
The reason I asked is that AFIK Austron acquired the Sulzer line and
therefore we can probably go down an Austron route regarding any
documentation.
Rob Kimberley
Paul,
Send me a photo as well please. I have a Sulzer 1150 5MHz oscillator and am
curious if it looks the same.
Bill....WB6BNQ
wb6bnq at cox.net
Rob Kimberley wrote:
> Paul can you send me a photo of your oscillator?
>
> Cheers
>
> Rob Kimberley
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]
> On Behalf Of Steve Rooke
> Sent: 10 October 2008 08:37
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] Sulzer Labs D-5 oscillator
>
> 2008/10/10 Reeves Paul <Paul.Reeves at uk.thalesgroup.com>:
> > Hi all,
> >
> > I need a bit of help getting an old Sulzer D-5 5MHz oscillator to
> > work. It was built into a rack module with monitoring facilities and
> > had been slightly 'got-at' by the previous owner. Some of the
> > connections were pencilled on the case but not enough to give
> > confidence about powering it up. Has anybody got any information on
> > this 'classic' design? Pin connection data would be a great help,
> > anything
> more would be wonderful!!
> >
> > Thanks in advance,
> >
> > Paul Reeves, G8GJA
> >
> > This email, including any attachment, is a confidential
> > communication intended solely for the use of the individual or
> > entity to whom it is addressed. It contains information which is
> > private and may be proprietary or covered by legal professional
> > privilege. If you have received this email in error, please notify
> > the sender upon receipt, and immediately delete it from your system.
> >
> > Anything contained in this email that is not connected with the
> > businesses of this company is neither endorsed by nor is the
> > liability of
> this company.
> >
> > Whilst we have taken reasonable precautions to ensure that any
> > attachment to this email has been swept for viruses, we cannot
> > accept liability for any damage sustained as a result of software
> > viruses, and would advise that you carry out your own virus checks
> > before opening
> any attachment.
>
> I love that the disclaimer attached to this email is longer than the
> email itself. It's a new form of spam, inflate the amount of data on
> the Net by doubling the size of emails with these stupid disclaimers.
> Sorry Paul, this is not aimed at you at all.
>
> 73, Steve
> --
> Steve Rooke - ZL3TUV & G8KVD
> Omnium finis imminet
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list