[time-nuts] COMPLETELY off topic - but I know you'll read it anyway.
Poul-Henning Kamp
phk at phk.freebsd.dk
Sat Oct 11 12:16:26 UTC 2008
In message <f616e0f80810110510p4e8e1a1fw932acf8093cc38ea at mail.gmail.com>, "Jim
Palfreyman" writes:
>Do I run each 8 ohm speaker on its own 500W channel?
>
>or
>
>Do I run in bridged mode and put the two speakers in parallel onto the 1000W
>amplifier?
Unless the two speakers are _very_ identical, including length and type
of cabling from the amplifier, I will recommend against running them in
parallel.
As former sound technician I will also say this: run them on separate
channels, if you loose one channel, you don't loose your sound entirely.
--
Poul-Henning Kamp | UNIX since Zilog Zeus 3.20
phk at FreeBSD.ORG | TCP/IP since RFC 956
FreeBSD committer | BSD since 4.3-tahoe
Never attribute to malice what can adequately be explained by incompetence.
More information about the Time-nuts_lists.febo.com
mailing list