[time-nuts] Manually controlling the EFC on a Z3801/5

[Richard W. Solomon]

Did you ever get an answer to this question ? I may have missed it,
but I also am curious about this.

73, Dick, W1KSZ

-----Original Message-----
>From: Peter Vince <pvince at theiet.org>
>Sent: Mar 30, 2009 1:43 PM
>To: time-nuts at febo.com
>Subject: [time-nuts] Manually controlling the EFC on a Z3801/5
>
>Is it possible to lock down, or control, the EFC on a Z3801 or Z3805? 
>Putting it into Holdover allows the system to steer it according to 
>its learnt characteristics, but I would quite like to bolt it down to 
>see how stable, or otherwise, the oscillator is.  Unlike on the 
>Thunderbolt, I can't find any command to do that - does anyone know 
>if it is possible?
>
>	Thanks,
>
>		Peter
>
>_______________________________________________
>time-nuts mailing list -- time-nuts at febo.com
>To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>and follow the instructions there.