[time-nuts] Characterising frequency standards

[Steve Rooke]

Tom,

2009/4/11 Tom Van Baak <tvb at leapsecond.com>:
>> Nevertheless leaving every second sample out is NOT exactly the same as
>> continous data with Tau0 = 2 s. Instead it is data with Tau0 = 1 s and a
>> DEAD TIME of 1s. There are dead time correction schemes available in the
>> literature.
>
> Ulrich, and Steve,
>
> Wait, are we talking phase measurements here or frequency
> measurements? My assumption with this thread is that Steve
> is simply taking phase (time error) measurements, as in my
> GPS raw data page, in which case there is no such thing as
> dead time.

Yes, phase measurements as in the original GPS.dat data set on your site.

73,
Steve

>
> /tvb
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>



-- 
Steve Rooke - ZL3TUV & G8KVD & JAKDTTNW
Omnium finis imminet