[time-nuts] Methods for comparing oscillators

Tom Van Baak tvb at LeapSecond.com
Mon Aug 3 04:13:46 UTC 2009


>A 1Hz offset may be convenient as its easy to adjust an 10811A or
> similar to achieve this.
> A 10Hz offset is harder to achieve.

Would either of these be 10 Hz solutions?
1) open the 10811 and change the xtal load capacitance, or
2) change the oven temperature set point until the resonator
is 10 Hz off. You'd loose a little in tempco but...

/tvb






More information about the Time-nuts_lists.febo.com mailing list