[time-nuts] [OT] Help needed with HP 16700A
Peter Loron
peterl at standingwave.org
Tue Aug 4 18:50:08 UTC 2009
I have no idea what the hostname is. Yeah, I think the next step is to
try and reload the OS. If that still doesn't fix it, then I may need
to start troubleshooting the PS2 ports...the keyboard isn't responding
as it should when the LA starts up, and a kb and mouse need to be
present for the LA to come up properly as I understand.
Maybe a blown PS2 port.
-Pete
On Aug 4, 2009, at 11:29 AM, Pete Lancashire wrote:
> *********************************************************************
> *
> * The X-server can not be started on display lahpice:0 ...
> *
> *********************************************************************
>
> It is trying to connect to a Xserver with the name lahpice
>
> Is this the host name of your LA ?
>
> If not, I don't know where you change it (My 16702A is still waiting
> for me to get back to fixing the settings for the internal display)
>
> It may be a good idea to just reload everything from the CD.
>
> For a SCSI CDROM, look for Apple Mac and SUN externals.
>
> -pete
>
>
>> Apologies for the somewhat off topic post, but some folks here may be
>> able to assist...
>>
>> I have a HP 16700A logic analyzer that I'm trying to troubleshoot. I
>> can get access to the console via the serial port, and I can see that
>> it boots up normally, except that it fails to start the X server, and
>> drops to a login prompt for which I have no credentials.
>>
>> The complete boot dump from the serial console is posted at the end
>> of
>> the email.
>>
>> I have a keyboard and mouse plugged in. I have the service manual,
>> but
>> it basically says to either re-install the OS or replace the CPU
>> board. Nothing about the different operating states, logins, etc.
>>
>> The monitor connected to the VGA port displays 8 yellow boxes across
>> the bottom of the screen once the boot process starts. They say:
>>
>> [empty]
>> [empty]
>> [empty]
>> [REMOTE MODE *]
>> [empty]
>> [empty]
>> [DISPLAY FUNCTNS]
>> [AUTO LF]
>>
>> It seems like it is failing to find what it needs to start up using
>> the external monitor (not seeing the keyboard?), and so is defaulting
>> to the serial console.
>>
>> I have the latest software CD from Agilent, but am still searching
>> for
>> a SCSI CD-ROM to load it with.
>>
>> If anybody can shed some light on the issue or suggest
>> troubleshooting
>> steps, that would be great. I'm in the Seattle area, so any locals
>> would be welcome for a troubleshooting session.
>>
>> Thanks!
>>
>> -Pete
>>
>> --------------------------------------------------------------------------------------------------------
>>
>> Firmware Version 2.1
>>
>> Duplex Console IO Dependent Code (IODC) revision 1
>>
>> Memory Test/Initialization Completed
>>
>> ------------------------------------------------------------------------------
>> (c) Copyright 1995-1998, Hewlett-Packard Company, All rights
>> reserved
>> ------------------------------------------------------------------------------
>>
>> Processor Speed State Coprocessor State
>> Cache Size
>> --------- -------- --------------------- -----------------
>> ----------
>> 0 150 MHz Active Functional
>> 64 KB
>>
>>
>> Available memory (bytes) : 167772160
>> Good memory required (bytes): 167772160
>>
>> Primary boot path: SESCSI.6.0
>> Alternate boot path: SESCSI.1.0
>> Console path: GRAPHICS(0)
>> Keyboard path: PS2
>>
>> Processor is starting autoboot process.
>>
>> To discontinue, press any key within 2 seconds.
>>
>> 2 seconds expired.
>> Proceeding...
>>
>> Trying Primary Boot Path
>> ------------------------
>>
>> Booting...
>> Boot IO Dependent Code (IODC) revision 153
>>
>>
>> HARD Booted.
>>
>> ISL Revision A.00.38 OCT 26, 1994
>>
>> ISL booting hpux
>>
>> Boot
>> : disk(8/16/5.6.0.0.0.0.0;0)/stand/vmunix
>> 3813908 + 323584 + 323200 start 0x196468
>> vuseg=1013000
>> nfs_init3 added vfs type nfs3 at slot 4
>> NOTICE: cachefs_link(): File system was registered at index 5.
>> NOTICE: autofs_link(): File system was registered at index 6.
>> inet_clts:ok inet_cots:ok starship_attach: vendor id=103c, device
>> id=1650
>>
>> System Console is on the Built-In Serial Interface
>> Networking memory for fragment reassembly is restricted to 14356480
>> bytes
>> Logical volume 64, 0x3 configured as ROOT
>> Logical volume 64, 0x2 configured as SWAP
>> Logical volume 64, 0x2 configured as DUMP
>> Swap device table: (start & size given in 512-byte blocks)
>> entry 0 - major is 64, minor is 0x2; start = 0, size = 3145728
>> Warning: time-of-day register time is out-of-range
>>
>> Getting time from file system
>> Checking root file system.
>> file system is clean - log replay is not required
>> Root check done.
>> Starting the STREAMS daemons.
>> B2352B HP-UX (B.10.20) #1: Sun Jun 9 08:03:38 PDT 1996
>>
>> Memory Information:
>> physical page size = 4096 bytes, logical page size = 4096 bytes
>> Physical: 163840 Kbytes, lockable: 114172 Kbytes, available:
>> 134048 Kbytes
>>
>> /sbin/ioinitrc:
>>
>> /sbin/bcheckrc:
>> Checking for LVM volume groups and Activating (if any exist)
>> Volume group "/dev/vg00" has been successfully changed.
>> vxfs fsck: sanity check: root file system OK (mounted read/write)
>> /sbin/itemap: WARNING: An attempt to write keyboard mapping entries
>> past
>> /sbin/itemap: the end of the buffer. Further writes will be ignored.
>> Checking hfs file systems
>> /sbin/fsclean: /dev/vg00/lvol1 (mounted) ok
>> HFS file systems are OK, not running fsck
>> Checking vxfs file systems
>> /dev/vg00/lvol3 :
>> vxfs fsck: sanity check: root file system OK (mounted read/write)
>> /dev/vg00/lvol4 :
>> vxfs fsck: sanity check: /dev/vg00/lvol4 OK
>> /dev/vg00/lvol5 :
>> vxfs fsck: sanity check: /dev/vg00/lvol5 OK
>>
>> (c)Copyright 1983-1996 Hewlett-Packard Co., All Rights Reserved.
>> (c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of
>> California
>> (c)Copyright 1980, 1984, 1986 Novell, Inc.
>> (c)Copyright 1986-1992 Sun Microsystems, Inc.
>> (c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology
>> (c)Copyright 1989-1993 The Open Software Foundation, Inc.
>> (c)Copyright 1986 Digital Equipment Corp.
>> (c)Copyright 1990 Motorola, Inc.
>> (c)Copyright 1990, 1991, 1992 Cornell University
>> (c)Copyright 1989-1991 The University of Maryland
>> (c)Copyright 1988 Carnegie Mellon University
>>
>> RESTRICTED RIGHTS LEGEND
>> Use, duplication, or disclosure by the U.S. Government is subject to
>> restrictions as set forth in sub-paragraph (c)(1)(ii) of the Rights
>> in
>> Technical Data and Computer Software clause in DFARS 252.227-7013.
>>
>>
>> Hewlett-Packard Company
>> 3000 Hanover Street
>> Palo Alto, CA 94304 U.S.A.
>>
>> Rights for non-DOD U.S. Government Departments and Agencies are as
>> set
>> forth in FAR 52.227-19(c)(1,2).
>> Aug 03 11:08:39 auto_parms >> Checking network status.
>> 8/16/6 0x001083358ADA 0 UP lan0 DOWN 4 ETHER
>> Yes 52
>> Aug 03 11:08:41 auto_parms >> /sbin/auto_parms, checking network for
>> DHCP server (see /etc/auto_parms.log)
>>
>> Aug 03 11:08:44 auto_parms >> DHCP Client Status:
>> Aug 03 11:08:44 auto_parms >> DHCP is disabled for: lan0
>> i
>> HP-UX Start-up in progress
>> __________________________
>>
>> Mount file systems ................................ OK
>> Setting hostname .................................. OK
>> Enable auxiliary swap space ....................... OK
>> Start syncer daemon ............................... OK
>> Configure LAN interfaces .......................... OK
>> Check LAN Status .................................. OK
>> Start Software Distributor agent daemon ........... OK
>> Configuring all unconfigured software filesets .... OK
>> List and/or clear temporary files ................. OK
>> Clean up old log files ............................ OK
>> Start system message logging daemon ............... OK
>> Configure HP Ethernet interfaces .................. OK
>> Configure HP 100BT interfaces ..................... N/A
>> Configure LAN interfaces .......................... OK
>> Start NFS core subsystem .......................... OK
>> Start NFS client subsystem ........................ OK
>> Start Internet services daemon .................... OK
>> Cleaning up NIS client subsystem .................. OK
>> Start NIS client subsystem ........................ OK
>> Verifying NIS client subsystem .................... OK
>> Starting kks daemon ............................... OK
>> Start time synchronization ........................ N/A
>> Start print spooler ............................... N/A
>> Start clock daemon ................................ OK
>> Set X11 Device Configuration ...................... OK
>> Start the HP SICL subsystem (IPROC) ............... N/A
>> Start 16610A Processor Run Control daemon ......... OK
>> Start httpd (Web Server) .......................... OK
>> Start NFS server subsystem ........................ OK
>> Start Lmgrd daemon ................................ OK
>>
>> The system is ready.
>>
>>
>> *****************************************************************************
>> *
>> * The X-server can not be started on display lahpice:0 ...
>> *
>> *****************************************************************************
>>
>>
>> HP Logic Analysis System
>>
>> Please Log in as: <user-name> [displayname:0]
>>
>> Console Login:
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list