[time-nuts] PTS X10 Information needed

[Dave]

Thanks, Nigel;

I have 2 ea of 30-40MHz and 90-100MHz.

Dave. W5WP

GandalfG8 at aol.com wrote:
>  
> In a message dated 04/08/2009 23:23:24 GMT Daylight Time,  
> dave at wpaperman.com writes:
>
> I am  looking for the technical and  operator manual for the PTS X10. I  
> acquired 4 of them several weeks ago and would like to determine if I  
> can use them in my test setups.
>
>
>
> -----------------
> Hi Dave
>  
> The system section of the manual is on Didier's web site.....
>  
> _http://www.ko4bb.com/cgi-bin/manuals.pl?dir=05)_GPS_Timing/PTS/PTS_X10_Syst
> em_Section_Manual_ 
> (http://www.ko4bb.com/cgi-bin/manuals.pl?dir=05)_GPS_Timing/PTS/PTS_X10_System_Section_Manual) 
>  
> That should give you the information you need to get up and running,  I've 
> never got round to scanning the rest of the manual but you  shouldn't really 
> need that unless you've got hardware problems.
>  
> The individual part numbers will identify the 10MHz decade between 0.1  and 
> 100MHz covered by each unit, more info on that may be in the  manual but 
> should otherwise be available from the PTS catalogue  downloadable from the 
> PTS web site.
>  
> regards
>  
> Nigel
> GM8PZR
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
>