[time-nuts] [Fwd: Re: Racal 1992]

[iovane at inwind.it]

I think this series is not the one used on 1992, but on racal receivers and exciters. I have some, and they look different. They have a 5 MHz output, while the 04E is rated at 10 MHz, even if the crystal is cut for 5 MHz.

Antonio I8IOV

> Hi Alan,
> 
> Small attachments seem to be okay.  Let's find out! :-)
> 
> I didn't realize that there was a whole family of 9400 series 
> oscillators.  Unfortunately, your sheet doesn't include the part numbers 
> that the 1991/1992 documentation includes although there are some family 
> similarities.  Still, it's good info to have.
> 
> Thanks,
> Ed
> 
> -------- Original Message --------
> 
> > Ed off list as I suspect the list wont accept attachments
> >
> > Best wishes
> > Alan G3NYK
> >
> > ----- Original Message -----
> > From: "Ed Palmer" 
> > To: "Discussion of precise time and frequency measurement"
> > <time-nuts at febo.com>
> > Sent: Thursday, August 27, 2009 8:01 PM
> > Subject: Re: [time-nuts] Racal 1992
> >
> >
> > > Hi Alan,
> > >
> > > I have the same info, but it's collected from multiple sources.  I
> > > haven't seen all of it in one official source.  I'd like to see it and
> > > I'm sure others would as well.
> > >
> > > Ed
> > >
> > > Alan Melia wrote:
> > > > Hi Ed I dont know whther it would be of interest but i have a page from
> > a
> > > > cat with the comparative specs for those OXCOs
> > > >
> > > > Alan G3NYK
> >
> 
>