[time-nuts] z3801a gps signal reflection and EFC woes
SAIDJACK at aol.com
SAIDJACK at aol.com
Thu Dec 3 22:25:45 UTC 2009
Just realized that if the Z3801A uses Sawtooth correction from the Oncore,
then it may slightly degrade the 1PPS from the M12+ unless there is a way
to disable sawtooth correction.
Nonetheless, I think the overall performance would improve significantly,
even if the M12+ sawtooth correction signal is not being used.
bye,
Said
In a message dated 12/3/2009 14:22:26 Pacific Standard Time,
SAIDJACK at aol.com writes:
Hi guys,
that's right, leave the old GPS in there so the firmware won't complain.
Just cut the 1PPS signal between the GPS and main-board, and feed-in an
external 1PPS with higher stability, the Z3801A will never know the
difference.
Should work well.
bye,
Said
More information about the Time-nuts_lists.febo.com
mailing list