[time-nuts] Looking for Floating Reference Chip

[WarrenS]

> Some ways can be real simple.
FOR the simplest  and BEST isolation use,
a 9 volt battery to power a low current 1 to 5 volt Ref + amp if need be.
You are not going to float very far with a 12 volt PS and 10 volt reference without some extra "stuff".
>Sounds like a Volt nut question
>Many ways to do it, some real simple, depends on 
>How far and how good  it has to float and  how stable/accurate  it has to be.

ws

*****************


Richard W. Solomon wrote:
> I am looking for a Voltage Reference chip that will take
> a 12 volt source and give me a floating output (+ and -
> not referenced to ground). An 8 or 10 volt output would be
> perfect.
>
> Any thoughts on what I could use ?
>
> Thanks, Dick, W1KSZ