[time-nuts] Thunderbolt serial port
Brooke Clarke
brooke at pacific.net
Fri Feb 20 03:35:25 UTC 2009
Hi Brian:
There have been a small number of problems related to poor solder joints on U9
(RS-232 chip) or the serial connector. see:
http://www.prc68.com/I/ThunderBolt.shtml#Maint
Have Fun,
Brooke Clarke
http://www.prc68.com
bjones0 at mindspring.com wrote:
> I'm tired of banging my head against the wall so I think it is time to
> ask.. Is there a way to test if the serial port on the Thunderbolt
> works? I know the Thunderbolt itself powers up and works (I get a
> 9.9999978 Mhz signal out of the 10Mhz output when it is on) but I have
> been unable to talk/listen to it in Windows (tboltmon or Lady Heather)
> or in Linux (even looking at the raw serial port state). I stuck my
> breakout box on the line but I get no lights on the Thunderbolt side.
>
> Thanks,
> Brian
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
More information about the Time-nuts_lists.febo.com
mailing list