[time-nuts] Lady Heather Update

Mark Sims holrum at hotmail.com
Sat Jan 31 16:27:07 EST 2009


Hello again Magnus,

If the program is started up and it is not seeing the Tbolt on the COM port you should see the "Log: OFF" indicator,  two lines of text that are the plot area header,  and the plot axes/grid.  Pressing  the SPACE bar should bring up a help screen in place of the plot grid.  If all that is working, the problem is probably in the COM port.  It wants the tbolt to be at factory com settings (9600,N,8,1)

The program talks to the COM port UART directly.  It probably won't work with a USB converter.  The default is COM1,  the /2 command line option should select COM2 (but I don't have a machine here with two serial ports to test it...  the com port code was lifted from another program that did work with COM2).

There are several command line options.  use /? to see them.
_________________________________________________________________
Windows Live™: E-mail. Chat. Share. Get more ways to connect. 
http://windowslive.com/howitworks?ocid=TXT_TAGLM_WL_t2_allup_howitworks_012009



More information about the time-nuts mailing list