[time-nuts] 1" 14 tpi UNS die

[Robert Atkinson]

Hi Dave,
A 3/4" pipe thread die will also work. Both NPT and BSP are 14tpi and have approx 1" major diameter. Try taking your bit of pipe to a gas fitter.
Clarke sell a multi-die kit for £35 inc VAT, http://www.machinemart.co.uk/shop/product/details/cht392-6-piece-pipe-threading-kit

Regards,
Robert G8RPI.

--- On Tue, 7/7/09, David C. Partridge <david.partridge at dsl.pipex.com> wrote:

> From: David C. Partridge <david.partridge at dsl.pipex.com>
> Subject: Re: [time-nuts] 1" 14 tpi UNS die
> To: "'Discussion of precise time and frequency measurement'" <time-nuts at febo.com>
> Date: Tuesday, 7 July, 2009, 1:20 PM
> Panasonic VIC-100 GPS antenna ...
> 
> Dave
> 
> -----Original Message-----
> From: time-nuts-bounces at febo.com
> [mailto:time-nuts-bounces at febo.com]
> On
> Behalf Of Chuck Harris
> Sent: 07 July 2009 13:07
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] 1" 14 tpi UNS die
> 
> I don't recognize the size you are asking for.  What
> is your application?
> 
> -Chuck Harris
> 
> David C. Partridge wrote:
> > Does anyone (preferably in the UK) have 1.0-14UNS-2A
> thread cutting 
> > die they would be prepared to lend me (preferably a
> die nut type as I 
> > don't have a die stock)?
> > 
> > Thanks
> > David Partridge
> > 
> > 
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to 
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> > 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>