[time-nuts] EFRATOM LPRO-101 Connector
Hal Murray
hmurray at megapathdsl.net
Tue Jul 14 16:52:38 UTC 2009
> How do folks like to connect to this RbO ? Do they use a connector ?
> Or just solder to the pins ? If they use a Connector can you tell me
> the Make & Part Number ?
They are standard 0.025 square pins on a 0.1 (inch) grid. All the connector
companies make something that will work. (probably more than one)
Appendix A of the user guide gives part numbers and catalog pages for several
companies.
The Digikey part number for a 2x5 Molex version is WM2522
That's just the free standing plastic shell. It ignores the screw-posts. (I
assume somebody makes something that will screw in there. I don't remember
ever seeing one.)
You also need pins. You can get the part numbers from the catalog page.
Then you need a crimp tool or a friend who has one. ...
You can probably find something that will fit ribbon cable. With only a bit
of kludgery, that will avoid the crimp tool. The standard mother-board to
DB-9 cable will probably work.
--
These are my opinions, not necessarily my employer's. I hate spam.
More information about the Time-nuts_lists.febo.com
mailing list