[time-nuts] AC cord or connector for 5061A

[phil]

I put them on -bay every now and then but they bring big bucks.
Try this link for the connector only,
http://www.peigenesis.com/itt-cannon-connectors.html

You may alter your search and include Military Connectors or Military power 
cords as that was common on some of the older Military versions of HP 
equipment.

Phil




----- Original Message ----- 
From: "J. L. Trantham" <jltran at worldnet.att.net>
To: "'Tom Van Baak'" <tvb at leapsecond.com>; "'Discussion of precise time and 
frequency measurement'" <time-nuts at febo.com>
Sent: Saturday, July 18, 2009 11:58 PM
Subject: Re: [time-nuts] AC cord or connector for 5061A


>I am aware of the connection issue but I can't find the connectors.  Are
> they still available or should I change both the chassis connector and
> mating connector to something that I can find?
>
> Thanks,
>
> Joe
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of Tom Van Baak
> Sent: Saturday, July 18, 2009 10:45 PM
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] AC cord or connector for 5061A
>
>
>> Does anyone know of a source for a power cord for the 5061A (or 5061B,
>> 5065A, etc.)?  I am looking for 3 cords or the connector that mates
>> with AC connector on the back.
>>
>> The AC Cord is HP part number 1251-2457 and the connector that mates
>> with the connector on the back is a Cannon MS3106A-18-22SW.
>>
>> Thanks in advance.
>>
>> Joe
>
> See if this helps.
>
> http://www.leapsecond.com/museum/hp5065a/conn.htm
>
> Best to open the bottom to make sure your unit has pins
> that match the schematic.
>
> /tvb
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to 
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.