[time-nuts] LPRO-101 Status
Don Key
don.key at ntlworld.com
Sat Jul 25 08:36:08 UTC 2009
I recently bought 2 LPRO-101's. The first worked perfectly, locking up
within 5 minutes.
The second one would not lock within 15 minutes, so I returned it (to China)
for a replacement. As I didn't have a heatsink, I didn't want to leave it
any longer. Besides, if it doesn't lock within 5 minutes, then I assume it
is faulty. Instead of the frequency sweeping up & down, the Xtal volts
started at around 6V2, then swept down to 0V & stayed there, leaving the
frequency about 180Hz low, as seen on a HP 8591E analyzer.
Out of interest, did your unit sweep up & down, or was it similar to mine?
...Jim
----- Original Message -----
From: "Richard W. Solomon" <w1ksz at earthlink.net>
To: <time-nuts at febo.com>
Sent: Friday, July 24, 2009 6:39 PM
Subject: [time-nuts] LPRO-101 Status
>I fired it up last night and it took about 2 hours to lock.
> This morning it only took about 20 minutes to lock.
> I guess I need to stir the electrons a bit more ??
>
> It's sitting there on the counter, with a 1000 sec Gate time
> and it is as accurate as I can measure (BTW, the counter
> reference is a GPSDO - TrueTime).
>
> Looks like a keeper.
>
> 73, Dick, W1KSZ
>
>
>
More information about the Time-nuts_lists.febo.com
mailing list