[time-nuts] Lady Heather question

ernieperes at aol.com ernieperes at aol.com
Thu Jun 18 16:12:46 EDT 2009


HI Murray,

got the same problem and found that the program looks as default COM1 port.......
Please chk and change port.

Rgds Ernie.


-----Original Message-----
From: Murray Greenman <Murray.Greenman at rakon.com>
To: jmiles at pop.net; holrum at hotmail.com
Cc: time-nuts at febo.com
Sent: Thu, Jun 18, 2009 8:45 pm
Subject: [time-nuts] Lady Heather question



John/Mark,

I don't own a Thunderbolt, but I do have a very nice Trimble NTGS50AA
GPSDO which works very well, and it also operates very nicely with
TBOLTMON, in both TSIP and SCPI modes.

However, I've just fired up Lady Heather V2.0 for the first time, and
although the program starts, nothing happens. I have a graph graticule
at the bottom, and a blank black area above with just a few things
written on it, such as the graph legend. No sign of the wealth of data
shown in the help file screen shot, nor any graph data, even after
waiting quite a while.

I tried both the Win version and the DOS version, and they behave the
same. My test computer is an old IBM Aptiva with 450MHz 586 processor,
running Win XP. I use COM2 and the program seems happy with that, and
everything works fine with TBOLTMON.

My next step is to drag out a laptop and spy on the comms between the
computer and GPSDO to see what's going on (if anything). I know this is
a big ask, but any suggestions as to what might be happening?

73,

Murray ZL1BPU


_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.




More information about the time-nuts mailing list