[time-nuts] TNC connectors

J. Forster jfor at quik.com
Tue Jun 23 19:55:48 UTC 2009


True. I always take the to be mated part w/ me to avoid repeat trips.
-John

=========

> Hi John,
>
> I only mentioned it so that someone wouldn't measure 1 inch, and
> walk off to Home Depot and ask for 1 inch, only to be in for a big
> surprise.
>
> -Chuck Harris
>
> J. Forster wrote:
>> I just took the antenna to Home Depot and looked through the bins, found
>> something that fit well, paid, and left. LoL. Whatever the nominal Pipe
>> size, mine is NPT for sure.
>>
>> -John
>>
>> ==========
>>
>>> If the thread measures 1 inch, it isn't 1 inch pipe thread.  It is
>>> more likely 1/2 inch pipe thread, or possibly 3/4 inch, depending on
>>> how accurately you measured.  1 inch pipe is 1-3/8 inch OD, 3/4 inch
>>> pipe is 1-1/16 inch OD, and 3/4 inch pipe is 7/8 inch OD.
>>>
>>> -Chuck Harris
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>






More information about the Time-nuts_lists.febo.com mailing list