[time-nuts] Hand Held GPS

[David McGaw]

As I found, do be aware that the Synergy VIC-100 (58532A clone) does 
not like 3V.  Does anyone know if the 58532A fairs better?  However, 
my experience is that the Synergy Timing 3000 is better, even though 
it is also rated for 5V only.

I happen to have just bought a Garmin GPSmap 60CSx myself.  It is 
nice that it spits out NMEA-0183, though the serial string is not 
timed well to the internal 1PPS - delayed and jittery.  :-(

Thanks,

David

At 01:06 PM 4/6/2009, you wrote:
>paul at greenrover.demon.co.uk wrote:
><help me find a gps that will work with a 5v antenna>
>
>To follow up on my previous request for help, I ordered a Garmin
>GPSmap60 which delivers an unloaded 3.2V to the MCX connector with fresh
>batteries.
>
>Tried it on a couple of Symetricom and Motorola site antennas on the end
>of 100 feet of cable and it works just fine.
>
>So thanks for all the pointers and help - job done!
>
>Regards Paul
>
>--
>73 de Paul GW8IZR IO73TI
>http://www.gw8izr.com
>
>
>_______________________________________________
>time-nuts mailing list -- time-nuts at febo.com
>To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>and follow the instructions there.