[time-nuts] GPS antenna installation problem

[Chuck Harris]

I know.  Did you read my post?

-Chuck Harris

Stan W1LE wrote:
> Actually it is "duct"  tape.
> 
> Used to air seal the metal joints in a metal duct work system for heat 
> and AC.
> 
> New building codes require a mastic paint be applied over all metal 
> joints in the duct work system.
> I guess it is an energy conservation issue, so the processed air does 
> not leak into unintended spaces.
> 
> Stan,W1LE
> 
> 
> Chuck Harris wrote:
>> Bill Hawkins wrote:
>> ...
>>   
>>> Speaking of conversions, I grew up (since 1938) with movie credits that
>>> mentioned the Gaffer (head electrician). Last year I mentored students
>>> building a robot for a FIRST Robotics competition. The carpet on the
>>> field would be marked with red, black, and white gaffer's tape, which we
>>> got in 2 inch width from a theater supply place. Gaffer's tape is
>>> intended to hold down wires running across a set until the show closes.
>>>
>>> Where did Gaffa tape come from?
>>>     
>> Probably from the same place as Duck tape.
>>
>> Human ears trying to make sense out of what they hear.
>>
>> -Chuck Harris
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>>   
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>