[time-nuts] FTS 1200 9110 1000A-100 1000B pinouts here!

[arie schellaars]

Hi Time Keepers
Not quite an answer to the below question , but my own request for  TCXO pinout info
on my recent purchase on Ebay.
The TCXO unit was designated to go into a HP5340A unit but the circuit doesn't seem to match with my oscillator module.
The unit either gets warm or oscillates but NOT both together at the same time.
Can't get a 10 MHz signal out but know it's oscillating by listening to it
with a receiver.
Perhaps it's needs surgery as per recent discussions in this forum.
Or even may need special dual power supply , again as per recent forum discussions here.
The module was made by Bulova and has p/n of 0960-0153.
It has a 15 way edge connector  and a HP P/N of 05340-60036 on the module "mother"
board.
Other info on the module states it needs +10 and +5vdc
 Hope some of you blokes can assist.
Cheers from down under.
Arie Schellaars
VK3DBF

--- On Sun, 1/3/09, Corby Dawson <cdelect at juno.com> wrote:


From: Corby Dawson <cdelect at juno.com>
Subject: [time-nuts] FTS 1200 9110 1000A-100 1000B pinouts here!
To: time-nuts at febo.com
Received: Sunday, 1 March, 2009, 1:02 AM


Well after re-researcing the pinouts again I decided to post this while
they are fresh.
These Pinouts are for units removed from FTS Cesium standards and were
verified by measurement in the standard.

PIN        1000B                1000A-100                1200            
      9110

1            EFC ground        EFC ground                EFC ground      
EFC ground

2           EFC +- 10V        EFC +- 10V             EFC 0 to +10V    
EFC 0 to +10V

3           coarse tune wiper       NC                        NC         
              NC

4           +12 pot ref. (10K)     NC                        NC          
             NC

5           Ground                    Ground                   Ground    
           Ground

6           oven mon.                oven mon..              oven mon.    
       oven mon.

7           +28V oven             +18V oven                 NC           
            NC

8           +28V elect.             +28V                       +28V      
              +28V

9            case ground                NC                        NC     
                  NC

Hope this will help others!

Corby Dawson
____________________________________________________________
Click here to find the perfect picture with our powerful photo search features.
http://thirdpartyoffers.juno.com/TGL2141/fc/BLSrjpTEuJFVrwUbhZLMoWdkMvKFgvKsveMbYvndjqBMzsnp5Ao03AENzO4/

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.



      Stay connected to the people that matter most with a smarter inbox. Take a look http://au.docs.yahoo.com/mail/smarterinbox