[time-nuts] OT: Basics of voltage calibration? Fluke manual5200A

[Roy Phillips]

Re..the Fluke manual downloads - - try the Australian Fluke website - - they 
have the best selection of all.

Roy

----- Original Message ----- 
From: "Chuck Harris" <cfharris at erols.com>
To: "Discussion of precise time and frequency measurement" 
<time-nuts at febo.com>
Sent: Sunday, March 22, 2009 9:35 PM
Subject: Re: [time-nuts] OT: Basics of voltage calibration? Fluke 
manual5200A


> Hi Frank,
>
> Thanks!  And they did a really good job with the scanning too.  They
> are using a nice auto feeding scanner that seems to be very well setup.
>
> Their searching tools could use some improvement, though.  I searched
> for 5200, 5200A, 341, 341A, 343, 343A, 8060, 8060A, and it didn't find
> any of them.  And I scanned through the lists they had for the various
> instrument types without success.  Apparently you have found a better
> area to look.
>
> -Chuck Harris
>
> Dr. Frank Stellmach wrote:
>> Chuck,
>>
>> I just have found the 5200A manual & addendum here:
>>
>> http://us.fluke.com/usen/support/manuals/default.htm?prodcategory=OBS
>>
>> The others I mentioned are the power amps only.
>>
>> Fluke still scans on, so look for other manuals later.
>>
>> Frank
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to 
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>