[time-nuts] more 5370B

[Didier Juges]

They all do that.

Didier 

> -----Original Message-----
> From: time-nuts-bounces at febo.com 
> [mailto:time-nuts-bounces at febo.com] On Behalf Of Connie Marshall
> Sent: Saturday, May 23, 2009 9:53 AM
> To: Discussion of precise time and frequency measurement
> Subject: [time-nuts] more 5370B
> 
> The heat sink on the back of my 5370B runs very hot. Can't 
> touch it for more than a fraction of a second. Maybe some 
> where around 140F. I assume this is not normal??
> 
> 73
> Connie
> K5CM
> 
> 
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]On
> Behalf Of Poul-Henning Kamp
> Sent: Saturday, May 23, 2009 1:35 AM
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] 5070B once more.... (actually 5370A fans)
> 
> 
> In message <BLU125-W32EB9626ACF899C8949FFCE560 at phx.gbl>, Mark 
> Sims writes:
> >
> >Many failed electrolytic caps on PC motherboards and in PC power 
> >supplies can be traced to a case of industrial espionage 
> gone wrong.  
> >[...]
> 
> While this tale is true, the fact is that even without 
> incompetence, electrolytics suck.
> 
> --
> Poul-Henning Kamp       | UNIX since Zilog Zeus 3.20
> phk at FreeBSD.ORG         | TCP/IP since RFC 956
> FreeBSD committer       | BSD since 4.3-tahoe
> Never attribute to malice what can adequately be explained by 
> incompetence.
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, 
> go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> 
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, 
> go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>