[time-nuts] Vectron Osc.
jmfranke
jmfranke at cox.net
Wed Nov 18 17:41:00 UTC 2009
For the CO-255 Series:
Holding the oscillator with the SMA connector up and looking at the bottom,
reading left to righ;
1. Supply (+)
2. Case
3. N/C (No connection)
gap
4. 0V, Case
and below:
5. Case.
By the way, the A17 series has a stability rating for =15C t0 +35C of +/- 1
part in 10,000,000.
Standard voltage is +15V @ <50mA for option R and output is >1.0Vrms/50 Ohms
(+13 dBm)
I can send the data sheet if needed.
John WA4WDL
--------------------------------------------------
From: <EWKehren at aol.com>
Sent: Wednesday, November 18, 2009 11:22 AM
To: <time-nuts at febo.com>
Subject: [time-nuts] Vectron Osc.
> I have two Vectron Labratories CO-255A17-R 400 MHz Crystal Oscillators
> that
> I would like to use but have no information on. They are 2X3 inches 3/4
> high SMA output and have five pins on the bottom, two are ground. Does
> any
> one have information. Thank you
> Bert Kehren Miami
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
More information about the Time-nuts_lists.febo.com
mailing list