[time-nuts] HP 5315A
J. L. Trantham
jltran at worldnet.att.net
Tue Oct 6 14:29:25 UTC 2009
Joe,
All I have is the paper manual for the 5315A/B, HP PN 05315-90021,
applicable to Serial Prefix 2120A and below. I also have the Manual
Changes, dated April 30, 1982, and June 3, 1982, applicable to Serial Prefix
2144A and 2204A.
The manual itself is about 1/2" thick and Chapter 8 has 39 pages, 6 of which
are the large fold out pages. Even on the original, the photos are
marginal.
Figure 8-14 is the 5315A Motherboard/Display schematic. Would that be
helpful? Or is there a specific part or function you are looking for?
Neither the 5315A or 5315B have HPIB but the 5316A (and I think also the
5316B) has the option. I have seen them on e..y for less than $50.
Let me know if there is a specific part I can scan and email to you. I am
in the midst of a 'heavy month' until the end of October and not a lot of
time to devote to the 'fun things'.
Joe
-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Joseph Gray
Sent: Tuesday, October 06, 2009 12:33 AM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] HP 5315A
J.L.,
Well, I'm missing the entire chapter 8. Is your manual on paper or is it
already scanned? I'd love a complete PDF with better scans of the pages with
photos.
Right now I'd like a good, readable copy of the schematic. This model
doesn't have any data output connection. From reading the circuit
description in HP Journal, I think it may be possible to add a data output
so that I can log things on a PC.
I know it would be easier (and more precise) to get an HP 5370A/B or
similar, but for now, the HP 5315A is what I have and can afford (got it for
free). If an interface isn't too complicated, I can probably scrounge from
the parts box.
Joe Gray
KA5ZEC
On Mon, Oct 5, 2009 at 10:11 PM, J. L. Trantham <jltran at worldnet.att.net>
wrote:
> Joe,
>
> I probably have one. What specifically are you looking for?
>
> Joe
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]
> On Behalf Of Joseph Gray
> Sent: Monday, October 05, 2009 3:07 AM
> To: Discussion of precise time and frequency measurement
> Subject: [time-nuts] HP 5315A
>
>
> Does anyone have a complete Ops/Service manual? The one I downloaded
> from Agilent is missing chapter eight, which is the service section.
> Also, the photos in that PDF are so faint as to be unusable.
>
> Joe Gray
> KA5ZEC
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list