[time-nuts] Getting GPIB to work on HP5382B Universal counter
John Ackermann N8UR
jra at febo.com
Wed Oct 14 12:22:43 UTC 2009
I'd be (happily) surprised if the NI libraries recognized Agilent
devices. I think they only support their own cards though.
There could also be a problem if you have both Agilent and NI support
libraries installed. I ran into this on Linux when I tried to install
the NI-provided drivers and libraries on a system where the linux-gpib
stuff was already installed; the result was that neither one worked!
John
----
Jerome Peters wrote:
> I have not yet met with success, but I have a little more experience ;)
> Since so many people have made helpful suggestions, I thought I'd include the current status.
>
> Just downloaded the most recent version of NI-488.2 version 2.5 off the NI website. It downloaded/unzipped/installed without any apparent issue.
> The "Devices and Interfaces - Measurement & Automation Explorer shows several different applications in the software tree, but does not recognize either of the two HP-IB interfaces that are installed/attached:
> - USB to HPIB (Agilent 82357A)
> - PCI to HPIB (HP 82350)
>
> I did go back to the Agilent Connection Expert (it still sees the two devices) I did check the "Enable Agilent GPIB cards for 488 programs"
> The MS Win XP Device Manager sees both of them.
>
> I did learn that you cannot just re-install NI-488.2 from the downloaded zip file, but have to use the MS software uninstall process first.
>
> Still no joy in recognizing the interface card(s)
>
> Thanks again & Regards,
> Jerome
> KC6ENE
More information about the Time-nuts_lists.febo.com
mailing list