[time-nuts] frequency sources
Hal Murray
hmurray at megapathdsl.net
Fri Oct 16 03:43:55 UTC 2009
> I'm not familiar with that particular part, but it's something to be
> aware of.
Your choice of output frequencies is pretty limited.
Overview (with diagram and link to full data sheet) at:
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3359
It's got an internal oscillator. You have a choice of 133, 125, 120, 100 or
66 MHz. (by ordering the right part number)
One output is that osc, possibly divided by 2, 4, or 8.
The second output is the same osc that goes through or around 2 dividers.
The first is 2, 4, or 8. The second divides by 2 through 1025.
It's not clear that you can control the output frequency well enough just by
changing the temperature. The graph is on page 20 of the data sheet. (next
to last page) I'm sure the output frequency will change if you adjust the
temperature, it's just not clear (to me) that you can steer it to a value of
your choice.
The typicals graph shows 1/4% over temp. The specs say 1/2% at 25C and 70C,
1.4% from +25 to +85C, and 1% for supply voltage.
But it's a dome shaped curve. You want a ramp.
You might be able to make it work if the output frequency you want allows you
enough flexibility in picking the divider. Say you want 1 MHz. So pick a
133 MHz part, and divide by 133 or 132 or 134, depending on how the part you
get actually ticks.
--
These are my opinions, not necessarily my employer's. I hate spam.
More information about the Time-nuts_lists.febo.com
mailing list