[time-nuts] Lady Heather and gpsd

[bg at lysator.liu.se]

Hi Tim,

IF you want to use NTP with the Tbolt, there is also the
refclock_palisade, that was expanded a few years ago to also support
Tbolts, besides the orginal palisad/acutime-line of Trimble receivers.

--

   Björn

> On 10/20/2009 10:58 AM, Mark Sims wrote:
>>
>> Heather will happily process any TSIP message that comes in over the
>> serial port (whether she requested them or not).  If they contain any
>> info that can be displayed,  then that info will go to the screen.  No
>> assumptions are made about packet timing, etc.  Data gets processed
>> and displayed as it comes in.
>> ...
> Thanks Mark. This is very useful information.
>> There are couple dozen status messages that get requested (one each
>> second).  To get an idea of what they are check the source file
>> heathgps.cpp   Look for the routine request_misc_msg().
> Very clever method!!
>
> I will take a look at adapting gpsd to add some support for LH operation
> or for a complete Linux port. Thanks for your help.
>
> Tim
> N2LTQ
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>