[time-nuts] Vectron Model 216-1688 data sheet?
Hal Murray
hmurray at megapathdsl.net
Fri Oct 30 13:26:45 UTC 2009
jwendler at harris.com said:
> Applying 15 V across pins 3 & 4 of the 7-pin semicircular connector
> results in about 55 mA of current draw, but no rf at either SMB. I do
> not have a variable resistor across pins 5-7 at the moment.
Is there another ground pin?
A while ago, I wired up an OXCO and scratched my head for a while because
there wasn't any signal. It all started working when I grounded the other
ground pin. (I was expecting there to be an internal connection.)
--
These are my opinions, not necessarily my employer's. I hate spam.
More information about the Time-nuts_lists.febo.com
mailing list