[time-nuts] 5071A tube EEPROM and tube data

[Dave Carlson]

Corby,

"The HP tubes used a heated metal "burst" diaphragm not glass ampoules to"

Actually, no. Glass ampoule inside the oven, surrounded by the wicking 
material. Last step in the process of starting up a new tube is to use a 
metal pin fired into the glass ampoule, similar to firing a small cartridge 
with an electrical discharge. The "explosion" drives the metal "bullet" into 
the glass ampoule, allowing the cesium to escape into the wicking material.

Dave

----- Original Message ----- 
From: "Corby Dawson" <cdelect at juno.com>
To: <time-nuts at febo.com>
Sent: Tuesday, September 08, 2009 00:14
Subject: [time-nuts] 5071A tube EEPROM and tube data


While copying the EEprom data to use with a new tube might be a
copyright violation, removing the EEprom from the defective tube and
using it with a replacement tube would not! It is easily removed from a
small PC board mounted on one of the tubes connectors!

John, There are stages in the EM. I'll see if one of the ones I removed
is handy and count the stages.

As far as "loose" cesium in the tube, not so much! Most of the spent
cesium is trapped in gooey carbon stuff spread around the inside of the
tube where the beams end up. However a nitrogen atmosphere glove box
would be the best way to try any repairs. Replacing a bad ion pump might
be possible this way. I used a giant tubing cutter to remove the end
caps to evaluate repairing tubes. Decided the market was not there to
make it worth the effort! A grinder with cutting disks is a quick way to
take one apart to explore the insides.

The HP tubes used a heated metal "burst" diaphragm not glass ampoules to
release the cesium during the tube manufacture.

Corby
____________________________________________________________
Free Roofing Estimates
Get up to 4 free roof estimates today. No obligation!
http://thirdpartyoffers.juno.com/TGL2141/c?cp=HIFSgPdu1RBgmTTs9F4m5QAAJ1ABLZFyqoH-WnHH1GJ345whAAQAAAAFAAAAACoBgz4AAAAAAAAAAAAAAAAAEhdkAAAAAA==

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to 
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.