[time-nuts] GPS with PPS

[Robert Darlington]

No, it's fluke.L (well, lowercase L), not upper case i.


-Bob

On Wed, Sep 30, 2009 at 2:45 PM, John Allen <john at pcsupportsolutions.com>wrote:

> Hello All -
>
> The seller's eBay ID is fluke.I.  The uppercase letter.
>
> Back to our regular fine Programming,  John K1AE
>
> ----- Original Message ----- From: "Roy Phillips" <phill.r1 at btinternet.com
> >
> To: "Discussion of precise time and frequency measurement" <
> time-nuts at febo.com>
> Sent: Wednesday, September 30, 2009 6:46 AM
> Subject: Re: [time-nuts] GPS with PPS
>
>
>
>  Joe
>> I would suggest that you could consider one of the Garmin GPS 16/17
>> models, that have been offered by Fluke1(China) at a sensible price. I have
>> a GPS 16HVS which is performing very well just sitting on a window-sill
>> (facing North), this offers a 1pps timing signal. It requires between 8.0 to
>> 40 volts D.C (nominally 12.00 volts @ 40 mA. The alternative model, 16LVS,
>> requires 3.3  to 8.0 volts.D.C @ 65 mA. All the data on these devices is
>> available on the Garmin website
>> Good luck
>> Roy
>>
>> ----- Original Message ----- From: "Joseph Gray" <jgray at zianet.com>
>> To: "Discussion of precise time and frequency measurement" <
>> time-nuts at febo.com>
>> Sent: Wednesday, September 30, 2009 9:36 AM
>> Subject: [time-nuts] GPS with PPS
>>
>>
>>  Does anyone know if any of those all-in-one hockey puck GPS receivers
>>> put out PPS on the serial cable? The type that has the antenna and GPS
>>> together, with a serial cable hanging off of it. I'm thinking about
>>> using one for a timing project. The more sensitive, the better, as it
>>> will be used indoors.
>>>
>>> While I'm on the subject of GPS units, a question comes to mind. I
>>> know that WAAS enhances position accuracy. Does it do anything for
>>> time? My first thought would be no, as that comes directly from the
>>> standard GPS satellites.
>>>
>>> Thanks,
>>>
>>> Joe Gray
>>> KA5ZEC
>>>
>>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>