[time-nuts] HP 5335A and HP-IB (GP-IB)

[WB6BNQ]

John,

It will also work for Ulrich's Plotter program and that maybe all that is needed
for a timenut purpose.

No ?

Bill....WB6BNQ

John Miles wrote:

> Depends on what he wants to do.  If he wants to write his own apps for the
> counter (or use mine) the Prologix controller will work fine.  You talk to
> it with generic COM port code rather than a proprietary API.
>
> If he wants to run existing commercial software like Labview he is likely
> better off buying a used National Instruments adapter on eBay, though.  It
> will not necessarily be any cheaper than a new Prologix adapter... probably
> close to the same price in fact, unless he makes the mistake of buying an
> ancient ISA-bus or RS-232 adapter.
>
> -- john, KE5FX
>
> > -----Original Message-----
> > From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]On
> > Behalf Of Bob Camp
> > Sent: Sunday, August 01, 2010 5:36 PM
> > To: Discussion of precise time and frequency measurement
> > Subject: Re: [time-nuts] HP 5335A and HP-IB (GP-IB)
> >
> >
> > Hi
> >
> > I think I'd haunt the e-place for a much cheaper alternative.
> >
> > Bob
> >
> >
> > On Aug 1, 2010, at 8:18 PM, Heathkid wrote:
> >
> > > I just purchased a HP 5335A and would like to know the group's
> > opinion on the following:
> > > http://www.sparkfun.com/commerce/product_info.php?products_id=549
> > >
> > > 73 Brice KA8MAV
> > >
> > > _______________________________________________
> > > time-nuts mailing list -- time-nuts at febo.com
> > > To unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > > and follow the instructions there.
> > >
> >
> >
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.