[time-nuts] What's the latest correct PICTIC II Mouser project?

[Bob Camp]

Hi

I strongly recommend checking your local inventory (dare I say junk box.) off a lot of the parts. Stuff like bypass caps likely something you have.

Bob



On Aug 7, 2010, at 5:10 AM, Steve Rooke <sar10538 at gmail.com> wrote:

> Hi Bob,
> 
> I have the correct DIL 74175 so I can untick that item.
> 
> Steve
> 
> On 07/08/2010, Bob Camp <lists at rtty.us> wrote:
>> Hi
>> 
>> As far as I know all the parts are correct except the 74175. It is the soic
>> version.
>> 
>> Bob
>> 
>> 
>> 
>> On Aug 6, 2010, at 7:16 PM, Steve Rooke <sar10538 at gmail.com> wrote:
>> 
>>> Bob,
>>> 
>>> Thanks for that, this Mouser project has all available parts. Do you
>>> know if the pots, trimmers, etc. are ones as suggested for the correct
>>> orientation, pin spacing, etc. as i believe there was some discussion
>>> regarding this in among the many postings on this topic?
>>> 
>>> Steve
>>> 
>>> On 07/08/2010, Bob Camp <lists at rtty.us> wrote:
>>>> Hi
>>>> 
>>>> I believe the project at:
>>>> 
>>>> http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=8736DCEE10
>>>> 
>>>> is up to date in (no un-orderable parts).
>>>> 
>>>> Bob
>>>> 
>>>> -----Original Message-----
>>>> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
>>>> Behalf Of Didier Juges
>>>> Sent: Friday, August 06, 2010 8:36 AM
>>>> To: 'Discussion of precise time and frequency measurement'
>>>> Subject: Re: [time-nuts] What's the latest correct PICTIC II Mouser
>>>> project?
>>>> 
>>>> 
>>>> I have not seen an answer to that question (for people in the US) ?
>>>> 
>>>> I am waiting for the PWB, which I believe I paid for, and I am planning
>>>> to
>>>> buy or make (have not looked into that yet) a PIC programmer, since it
>>>> looks
>>>> like I may get some mileage out of that anyhow.
>>>> 
>>>> No rush, but there is no good reason to delay either at that point.
>>>> 
>>>> Thanks
>>>> 
>>>> Didier
>>>> 
>>>> 
>>>> _______________________________________________
>>>> time-nuts mailing list -- time-nuts at febo.com
>>>> To unsubscribe, go to
>>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>>> and follow the instructions there.
>>>> 
>>>> 
>>>> 
>>>> 
>>>> _______________________________________________
>>>> time-nuts mailing list -- time-nuts at febo.com
>>>> To unsubscribe, go to
>>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>>> and follow the instructions there.
>>>> 
>>> 
>>> 
>>> --
>>> Steve Rooke - ZL3TUV & G8KVD
>>> The only reason for time is so that everything doesn't happen at once.
>>> - Einstein
>>> 
>>> _______________________________________________
>>> time-nuts mailing list -- time-nuts at febo.com
>>> To unsubscribe, go to
>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>> and follow the instructions there.
>>> 
>> 
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>> 
> 
> 
> -- 
> Steve Rooke - ZL3TUV & G8KVD
> The only reason for time is so that everything doesn't happen at once.
> - Einstein
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>