[time-nuts] What's the latest correct PICTIC II Mouser project?- Heathkid

[Heathkid]

  Did anyone already purchase a bunch of these that would be willing to 
part with 6 of them?

Mouser Part #:   	  271-620-RC
Mfr.'s Part #: 	271-620-RC
Description: 	620ohms 1% 50PPM
Mouser Product Availability

No Stock
7,868On Order
Estimated Ship Date

Thanks!
73 Brice KA8MAV


On 8/13/2010 2:47 AM, John Allen wrote:
> One is due to ship to them Monday 8/16.  See below.  The other is a problem -
> 10/18.
>
> Mouser Part #:   	  271-620-RC
> Mfr.'s Part #: 	271-620-RC
> Description: 	620ohms 1% 50PPM
> Mouser Product Availability
>
> No Stock
> 7,868On Order
> Estimated Ship Date
>
> 7,868 8/16/2010
>
> John K1AE
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On Behalf
> Of Heathkid
> Sent: Friday, August 13, 2010 1:48 AM
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] What's the latest correct PICTIC II Mouser project?-
> Heathkid
>
> Hello everyone.  I received my six (6) PICTIC II PCBs which are absolutely
> beautiful (after a couple minutes of standard cleaning with a pencil eraser
> which I do anyway to *any* PCB* I order) and I was getting ready to place my
> order for the components tonight but the following (in the "latest project")
> are now "back ordered" with estimated shipping dates of like October!  Any
> suggestions for equal or superior parts?  Please?  Does anyone have an
> updated "Mouser Project" that has all the "correct" or better quality parts
> in stock (equal to or better quality that spec'd)?
>
> Here's what I've been trying to work with thanks to Bob Camp.
> Unfortunately, two of the components are now not available... help???
>
> https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=8736DCEE10
>
> Mouser #:  271-620-RC
> Metal Film Resistors - Through Hole 620ohms 1% 50PPM
>
> Mouser #:  271-2.4K-RC
> Metal Film Resistors - Through Hole 2.4Kohms 1% 50PPM
>
> I'd like to place the complete order for all the components for my six
> PICTIC II's as quickly as possiible.
>
> Thanks,
> 73 Brice KA8MAV
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.