[time-nuts] GPS pcb IDs??

[Christian Riesch]

> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of Alan Melia
> Sent: Thursday, 19. August 2010 12:44
> To: didier at cox.net; Discussion of precise time and frequency
> measurement
> Subject: Re: [time-nuts] GPS pcb IDs??
> 
> Hi Didier, the Trimble is a Resolution T (3.3v)....user manual at the
> URL
> quoted by Stanley (Thanks again Stanley)
> The Synergy is Motorola UT+ Oncore (5v)  and I am sure the manual for
> those
> is around somewhere but not had time to chase that yet. 

Alan,
on the gpsd website you can find the Motorola Oncore Documentation:
http://gpsd.berlios.de/vendor-docs/motorola/

Christian


> Please feel free to
> add these to your gallery.......I may have some more when I get round
> to
> taking some photos
> 
> Thanks and Best Wishes
> Alan G3NYK
> 
> ----- Original Message -----
> From: "Didier Juges" <didier at cox.net>
> To: "Time-Nuts" <time-nuts at febo.com>
> Sent: Thursday, August 19, 2010 12:43 AM
> Subject: Re: [time-nuts] GPS pcb IDs??
> 
> 
> > Alan,
> >
> > You may want to compare to those:
> > http://www.ko4bb.com/Timing/GPS_Pics/
> >
> > If they do not match and you eventually find out what they are,
> please let
> me know and I will add them to my collection.
> >
> > That goes for anybody who has identified, clear pictures of GPS
> receiver
> boards, both sides preferably.
> >
> > Thanks in advance,
> >
> > Didier KO4BB
> >
> > ------------------------
> > Sent from my BlackBerry Wireless thingy while I do other things...
> >
> > -----Original Message-----
> > From: "Alan Melia" <alan.melia at btinternet.com>
> > Sender: time-nuts-bounces at febo.com
> > Date: Thu, 19 Aug 2010 00:07:20
> > To: Time-Nuts measurement<time-nuts at febo.com>
> > Reply-To: Discussion of precise time and frequency measurement
> > <time-nuts at febo.com>
> > Subject: [time-nuts] GPS pcb IDs??
> >
> > Hi I have just acquired a couple of GPS receiver pcbs, ex Telcoms
> equipment.
> > I know a lot of htese poards were discussed so time ago on the group.
> Does
> > anyone recognise what they are and could point me at some
> intrormations
> > please.
> > I am afraid the flash has washed the the pics out a bit but hopefully
> there
> > is enough detail to be recognised
> > http://www.alan.melia.btinternet.co.uk/GPS/Trimble_top.JPG
> > http://www.alan.melia.btinternet.co.uk/GPS/Trimble_lower.JPG
> > http://www.alan.melia.btinternet.co.uk/GPS/Synergy_top.JPG
> > http://www.alan.melia.btinternet.co.uk/GPS/Synergy_lower.JPG
> >
> > The Trimble pcb is 2.6 by 1.25in., and the Synergy is 3.15 by 1.6 in.
> >
> > Thanks
> > Alan
> > G3NYK
> >