[time-nuts] OT [GPS Survey grade RX]

Brian Kirby kilodelta4foxmike at gmail.com
Mon Dec 6 08:08:03 EST 2010


  A good general purpose reference on GPS surveying is

http://140.194.76.129/publications/eng-manuals/em1110-1-1003/toc.htm

Title: * Engineering and Design - NAVSTAR Global Positioning System 
Surveying *
*by the Army Corp of Engineering.  Full manual is 20 Mb.


*On 12/6/2010 1:06 AM, Rob Kimberley wrote:
> Their measurements are usually referenced to a known survey point via
> differential methods.
>
> Rob Kimberley
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of Jim Lux
> Sent: 06 December 2010 4:40 AM
> To: jfor at quik.com; Discussion of precise time and frequency measurement
> Cc: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] OT [GPS Survey grade RX]
>
>
> Sure..
> That's what all those geodesy folks do.  Over sufficient time span, one can
> relate gps measurements to an eci frame On Dec 5, 2010, at 5:43 PM, "J.
> Forster"<jfor at quik.com>  wrote:
>
>> GPS surveying "relative to astronomical reference"? I don't think so.
>>
>> -John
>>
>> ==============
>>
>>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>




More information about the time-nuts mailing list