[time-nuts] Got 60HZ?

[Bob Camp]

Hi

Yes indeed, use the 10 MHz as the clock to the PIC or any similar cheap CPU.
The external clock input pin does a fine job (for this purpose) of taking in
a sine wave.  

Bob

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Chris Albertson
Sent: Friday, December 10, 2010 1:05 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Got 60HZ?

On Fri, Dec 10, 2010 at 4:32 AM, Bob Camp <lists at rtty.us> wrote:
> Hi
>
> Easier to do with a cheap pic.
>
> If all you want is 60 Hz of of a 10 MHz source, load up one of the timers
/ PWM's. Change the load as required to hit 60 Hz.

I don't see how this is going to track the 10Mhz reference unless
maybe you use it to clock the PIC.  That would work if you had a PIC
that would run on 10Mhz

-- 
=====
Chris Albertson
Redondo Beach, California

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.