[time-nuts] Advice on 10 MHz isolation/distribution (Clay)

[life speed]

I seem to not be accomplishing much isolation from output to input, as well as output to output.  Have I fumbled PSPICE somehow?  For each simulation, Vac was set separately, with V1=0.707V at the input, while V6=0V at the output (sim1).  Then V1=0V, and V6=0.01V (sim2).


      
-------------- next part --------------
A non-text attachment was scrubbed...
Name: clay_schem1.pdf
Type: application/pdf
Size: 13435 bytes
Desc: not available
URL: <http://febo.com/pipermail/time-nuts_lists.febo.com/attachments/20100212/adb9e404/attachment.pdf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: clay_sim1.pdf
Type: application/pdf
Size: 10376 bytes
Desc: not available
URL: <http://febo.com/pipermail/time-nuts_lists.febo.com/attachments/20100212/adb9e404/attachment-0001.pdf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: clay_sim2.pdf
Type: application/pdf
Size: 11630 bytes
Desc: not available
URL: <http://febo.com/pipermail/time-nuts_lists.febo.com/attachments/20100212/adb9e404/attachment-0002.pdf>