[time-nuts] Jupiter GPS DO

Robert Atkinson robert8rpi at yahoo.co.uk
Thu Feb 18 02:49:52 EST 2010


Hi Ashley,
I can supply programmed chips for you. I have a couple of Jupiters but will have to check the Software revision.
Please conmtact me off list.
 
Robert G8RPI.

--- On Thu, 18/2/10, ashley40 at aol.com <ashley40 at aol.com> wrote:


From: ashley40 at aol.com <ashley40 at aol.com>
Subject: Re: [time-nuts] Jupiter GPS DO
To: peter at ni6e.com, time-nuts at febo.com
Date: Thursday, 18 February, 2010, 3:20



Hello........thank you !! I have no facilities for doing that, so maybe I can find someone who can do the programming with whatever gizmo is needed, if I furnish the chips?

Thanks 

Ashley
W7DUZ





Thank You
Kiss-Electronics
Ms Ashley Hall
183 N 5th Avenue
Cornelius, Oregon
97113


W7DUZ


www.kiss-electronics.com



-----Original Message-----
From: Peter Putnam <pico.2008 at sbcglobal.net>
To: Discussion of precise time and frequency measurement <time-nuts at febo.com>
Sent: Wed, Feb 17, 2010 7:16 pm
Subject: Re: [time-nuts] Jupiter GPS DO


Ashley, 

You will find Microchip PIC code that does exactly what you want here: 

http://www.ni6e.com/time/GPS_Valid_Fix.html 

The variables are set for use with a Rockwell Jupiter chip set. 

Regards, 
Peter 


ashley40 at aol.com wrote: 
> Hello .... I wanted to thank everyone who responded when I got on here and whined about not knowing how to get a Jupiter GPS DO gizmo going. > I finally did a crash course in GPS and DO's, and, even though my head hurts , I think I have a pretty good idea how all those pieces are scrunched together and how they work . (sort of). 
> Anyhow, 
> I would like to know if anyone out there in Time Nutz land has any of the following stuff they might consider selling: 
> Jupiter gps receivers ( V1.80 or higher), OR a Jupiter GPSDO complete gizmo, OR 
> The little microprocessor thing that W1 ( Mr Sullivan I think) something had offered a couple of years ago: it was designed to show a LED when the Jupiter RS232 data stream showed a GPS "lock" > I would like to get my hands on at least one of those "lock LED" gizmos. ( or the parts to build one). I did Email Mr Sullivan but so far no response. > 
> Thanks again for everyone's help ! 
> 
> Ms Ashley Hall 
> ( W7DUZ) > 
> 
> 
> > > Thank You 
> Kiss-Electronics 
> Ms Ashley Hall 
> 183 N 5th Avenue 
> Cornelius, Oregon 
> 97113 
> > > W7DUZ 
> > > www.kiss-electronics.com 
> _______________________________________________ 
> time-nuts mailing list -- time-nuts at febo.com 
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts 
> and follow the instructions there. 
> 
>  
_______________________________________________ 
time-nuts mailing list -- time-nuts at febo.com 
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts 
and follow the instructions there. 

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.



      


More information about the time-nuts mailing list