[time-nuts] I think I've become a Volt nut too.

[paul swed]

There are numbers of low power references
I like to take 2-3 of these put them together with 3 resistors to average
the diff.

On Tue, Jan 12, 2010 at 11:26 AM, Richard W. Solomon <w1ksz at earthlink.net>wrote:

> Maxim has a number of voltage reference chips. I built
> one using a 2.5 vdc output.
>
> 73, Dick, W1KSZ
>
>
> -----Original Message-----
> >From: Roy Phillips <phill.r1 at btinternet.com>
> >Sent: Jan 12, 2010 3:19 AM
> >To: Discussion of precise time and frequency measurement <
> time-nuts at febo.com>
> >Subject: Re: [time-nuts] I think I've become a Volt nut too.
> >
> >Hi Nick
> >Is it possible to let us have the schematic/details of this SC Magazine
> >Voltage Reference project, thanks
> >Roy
> >
> >
> >--------------------------------------------------
> >From: "Nic McLean" <mcleann at bigpond.com>
> >Sent: Tuesday, January 12, 2010 3:12 AM
> >To: "'Discussion of precise time and frequency measurement'"
> ><time-nuts at febo.com>
> >Subject: [time-nuts] I think I've become a Volt nut too.
> >
> >> Hi All,
> >>
> >> I have been a time nut for some time now. I think I've become a Volt nut
> >> too! I build the Silicon Chip magazine Voltage reference late last year
> >> but
> >> didn't have anything to compare it against so I bought a Fluke 732A DC
> >> reference standard.
> >>
> >>
> >>
> >> I there a group I can subscribe to that can help me with this?
> >>
> >>
> >>
> >> Can I coin the phrase; A man that has one DC Voltage standard knows how
> >> accurate his meter is, whereas a man with two standards is not quite
> sure!
> >>
> >>
> >>
> >> Regards,
> >>
> >> Nic
> >>
> >> VK2KXN VK5ZAT
> >>
> >> _______________________________________________
> >> time-nuts mailing list -- time-nuts at febo.com
> >> To unsubscribe, go to
> >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> >> and follow the instructions there.
> >>
> >
> >
> >_______________________________________________
> >time-nuts mailing list -- time-nuts at febo.com
> >To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> >and follow the instructions there.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>