[time-nuts] Lady Heather Software

[Richard W. Solomon]

Thanks, that works a lot better. Part of the bottom seems cut off,
but I can live with that.
The computer is an old 486 Compaq I use for radio Programming and as
such, finding updates for the Video Drivers may be a problem !!

73, Dick, W1KSZ


-----Original Message-----
>From: John Miles <jmiles at pop.net>
>Sent: Jan 12, 2010 1:37 PM
>To: Discussion of precise time and frequency measurement <time-nuts at febo.com>
>Subject: Re: [time-nuts] Lady Heather Software
>
>That normally means you're trying to run it at a fullscreen resolution your
>video card/monitor doesn't support.  Try the /vs /f combination to see if a
>lower resolution will work?  Otherwise, you may need to update the video
>drivers on the machine.
>
>-- john, KE5FX
>
>> -----Original Message-----
>> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]On
>> Behalf Of Richard W. Solomon
>> Sent: Tuesday, January 12, 2010 10:14 AM
>> To: Discussion of precise time and frequency measurement
>> Subject: Re: [time-nuts] Lady Heather Software
>>
>>
>> I installed Lady Heather but when I try to get a full screen version
>> I get two error messages and the program aborts:
>>
>> Set Display Mode Failed
>>
>> DirectDraw could not be initialized
>>
>> Any hints on what to try ?
>>
>> Putting a /f in the target line does not work.
>>
>> 73, Dick, W1KSZ
>>
>>
>>
>>
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>
>
>_______________________________________________
>time-nuts mailing list -- time-nuts at febo.com
>To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>and follow the instructions there.