[time-nuts] 4 KV Power Supply Recommendations

[paul swed]

Very good time is your friend

On Sun, Jan 24, 2010 at 8:50 PM, J. L. Trantham <jltran at worldnet.att.net>wrote:

> Weekend Update.
>
> As of this evening, the voltage on pin 4 is -0.811 VDC and the HV is 2313
> VDC.
>
> The progress has been start and stop but a steady trend in the right
> direction.  The voltage on pin 4 (that needs to get to 4 VDC in order to
> turn on the CS Oven) has remained relatively stable at -0.253 VDC.  It was
> -0.263 on the morning of the 19th.
>
> Any predictions as to whether this will come on line without going to a
> higher voltage/higher current supply?
>
> Rather than building an HV power supply this weekend, I spent the entire
> weekend cleaning up the work shop.  I can now WALK in the shop.
>
> Joe
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of J. L. Trantham
> Sent: Monday, January 18, 2010 8:41 AM
> To: 'Discussion of precise time and frequency measurement'
> Subject: Re: [time-nuts] 4 KV Power Supply Recommendations
>
>
> This morning, -0.995 VDC and 2181 VDC.  Progress!
>
> Joe
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of J. L. Trantham
> Sent: Sunday, January 17, 2010 9:14 PM
> To: 'Discussion of precise time and frequency measurement'
> Subject: Re: [time-nuts] 4 KV Power Supply Recommendations
>
>
> This evening, the voltage on pin 4 is -1.039 VDC and the HV is up to 2151
> VDC.
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>