[time-nuts] Pic programing for the PICTIC II

Bob Bownes bownes at gmail.com
Fri Jul 2 15:37:32 EDT 2010


Changed it to a different part that is available. Difference is RHoS
compliance method.

Changed the backordered 2n3906 as well. Shaved $0.02 off the total cost!

Bob


On Fri, Jul 2, 2010 at 3:17 PM, Bob Camp <lists at rtty.us> wrote:
> Hi
>
> It looks like it may be a while before the trim pots come in (12 weeks...).
> The 3266X (side adjust rather than top adjust) is in stock. I'm not sure if
> the layout is "side adjust" friendly or not.
>
> Bob
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of Bob Bownes
> Sent: Friday, July 02, 2010 2:54 PM
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] Pic programing for the PICTIC II
>
> Folks,
>
> I put together a mouser 'project' with all of the parts. This means
> you can just go to the mouser site and order all the parts for the
> project. No need for anyone to do a group buy of parts, re-pack and
> re-distribute them. Here's how to get to it:
>
> To access the project, click on the url listed below or copy and paste
> it into your web browser:
>
> http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=c7ada9ced0
>
> Or you can access the project by going to http://www.mouser.com/ and
> click on the EZ Buy option on the top navigation bar. You can also
> click on this link or copy and paste it into your browser:
> http://www.mouser.com/Tools/Tools.aspx. Then enter the following
> access number listed below into the Project Access ID function.
>
> c7ada9ced0
>
>
> Total cost w/o shipping is $30.30.
>
>
> On Fri, Jul 2, 2010 at 1:23 PM, Peter Vince <pvince at theiet.org> wrote:
>> Apologies for the previous incomplete message - somehow my laptop
>> trackpad jumped the cursor over the send button :-(
>>
>>> Better ?
>>> How many16f688s are we talking here?
>>>
>>> My thinking is less than 10 as only two people have asked.
>>> Don't know how many have not asked.
>>
>> I would also like a pre-programmed PIC please, if someone can arrange
>> that.  Or ideally, a complete kit of parts, but as the previous
>> correspondent has written, I appreciate that is a lot of work.
>>
>> Thanks,
>>
>>     Peter Vince  (London, England)
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>




More information about the time-nuts mailing list