[time-nuts] PICs

[Lester Veenstra]

Addresses are below

I will go ahead and order a double set of parts.



Lester B Veenstra  MØYCM K1YCM
lester at veenstras.com
m0ycm at veenstras.com
k1ycm at veenstras.com
 

US Postal Address:
PSC 45 Box 781
APO AE 09468 USA

UK Postal Address:
Dawn Cottage
Norwood, Harrogate
HG3 1SD, UK

Telephones:
Office:     +44-(0)1423-846-385
Home:     +44-(0)1943-880-963 
Guam Cell: +1-671-788-5654
UK Cell:   +44-(0)7716-298-224 
US Cell:   +1-240-425-7335 
Jamaica:  +1-876-352-7504 
 
This e-mail and any documents attached hereto contain confidential or
privileged information. The information is intended to be for use only by
the individual or entity to whom they are addressed. If you are not the
intended recipient or the person responsible for delivering the e-mail to
the intended recipient, be aware that any disclosure, copying, distribution
or use of the contents of this e-mail or any documents attached hereto is
prohibited.


-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of gonzo .
Sent: Sunday, July 04, 2010 6:47 PM
To: time-nuts
Subject: [time-nuts] PICs


Hi Steve,
my thought at this stage is to use you as a guinea pig.
I'm guessing ZL is (in postal terms) about as far (and as expensive) as you
can get from my local post office.
So it will be useful to know if the PO let it go as a letter (no customs
deceleration etc.).
The next point (not unrelated) is that the board and parts are not useful
without the PIC.
I thought what I'd do is program up a couple I have on hand and get them in
the post to you. That way, you should have them when your ready to build.
The only downside I can see is that with so many people building these TICs,
I wouldn't be surprised if there are some rapid changes to the code. Given
the price of the PICs, I guess there is no real problem having a spare set
that can be rotated.

If your happy with this idea, send me your address and I'll load the current
code and get them on their way.

73
ian

> Date: Sun, 4 Jul 2010 19:56:35 +1200
> From: Steve Rooke <sar10538 at gmail.com>
> Subject: Re: [time-nuts] Pic programing for the PICTIC II
> To: Discussion of precise time and frequency measurement
> 	<time-nuts at febo.com>
> Message-ID:
> 	<AANLkTiknwxA2d1EjuIgZ9nfl0NLz7VUrpozDp98QHX34 at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
> 
> Ian,
> 
> On 4 July 2010 08:18, gonzo . <cadbloke at hotmail.com> wrote:
> >
> > Hi Group,
> > in an effort to pool resources, I'm entering into a co-op arrangement
with another list member.
> >
> > I'm happy to either order the PICs and supply them programmed (cost
price plus postage) or, if you already have a PIC and want to post it to me,
I'll program it and return it in a SSAE for no cost.
> >
> > I'm in the UK, so postage rates and delivery times probably limit how
far it it practical for me to cover.
> >
> > Steve, as a VK living in GW, I'm happy to post to ZL.
> 
> That is a very kind offer, thanks. Let me know the total costs for two 
> with postage to Christchurch via a PM please.
> 
> Cheers,
> Steve
> 
> > cheers,
> > ian

 		 	   		  
_________________________________________________________________
Browse profiles for FREE! Meet local singles online.
http://clk.atdmt.com/NMN/go/150855801/direct/01/
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.